Some customers found our Guangchen lighting by searching for outdoor lighting fixtures. He said that he had just contacted the lighting engineering industry, saying that the effects of the outdoor lighting fixtures that were bought before were all for a while, and the dark areas were large and not good-looking. Our business manager immediately recommended him to our bottom-line outdoor lighting fixtures to explain the reasons for this.

Why are there dark areas between outdoor lighting fixtures?

The reason is very simple. The interval between the outdoor lighting fixtures is too large. This part is caused by the installation, and part of it is caused by the product. There are many cheap outdoor lighting fixtures on the market, the structure is simple, the thread ends are all coming out at the two ends of the lamp, and they can't be hidden. They can only be exposed between the two lamps, so the interval is large; and the Guangchen lighting bottom line is outdoor lighting. The luminaires and wiring can be hidden at the bottom, there is no space between the lamps, and there are few dark areas in the effect.

Generally speaking, the cover of the outdoor lighting fixture can be evaluated according to the structure. If you use the 30*30 plug-in glass outdoor lighting fixture of Guangchen Lighting, it can also be inserted into the glass. Replace it with a milky white acrylic cover that is similar in thickness. So, can all outdoor lighting fixtures be replaced? No, it needs to be judged according to its structure.

First, the power of the wall washer: the power of the wall washer will also affect the wall height. The higher the brightness, the farther the distance.

Second, the type of chip: LED light source chip model, brand, power will affect the wall washing height of the wall washer.

Of course, in addition to these two factors, there are many factors that affect the performance of the product during the manufacturing process of the luminaire. Therefore, when the product is developed, the manufacturer will perform a number of tests on the luminaire to confirm whether the luminaire meets the application requirements. .